CTIAPPSET, CTI Application Trigger Set register

The CTIAPPSET characteristics are:

Purpose

Sets the application triggers.

Configuration

External register CTIAPPSET bits [31:0] are architecturally mapped to External register CTIAPPCLEAR[31:0].

CTIAPPSET is in the Debug power domain.

Attributes

CTIAPPSET is a 32-bit register.

Field descriptions

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
APPSET31	APPSET30	APPSET29	APPSET28	APPSET27	APPSET26	APPSET25	APPSET24	APPSET23	APPSET22	APPSET21	APPSET20	APPSET19	APPSET18	APPSET17	APPSET16	APPSET15	APPSET14	APPSET13	APPSET12	APPSET11	APPSET10	APPSET9	APPSET8	APPSET7	APPSET6	APPSET5	APPSET4	APPSET3	APPSET2	APPSET1	APPSET0

APPSET<x>, bit [x], for x = 31 to 0

Application trigger <x> enable.

APPSET<x>	Meaning
0b0	Reading this means the application trigger is inactive. Writing this has no effect.
0b1	Reading this means the application trigger is active. Writing this sets the corresponding application trigger to 1 and generates a channel event.

If the ECT does not support multicycle channel events, use of CTIAPPSET is deprecated and the debugger must only use CTIAPPPULSE.

The reset behavior of this field is:

On an External debug reset, this field resets to an architecturally UNKNOWN value.

Accessing this field has the following behavior:

When x >= UInt(CTIDEVID.NUMCHAN), access to this field is RAZ/WI.
Otherwise, access to this field is W1S.

Accessing CTIAPPSET

CTIAPPSET can be accessed through the external debug interface:

Component	Offset	Instance
CTI	0x014	CTIAPPSET

Accessible as follows:

When SoftwareLockStatus(), accesses to this register are RO.
Otherwise, accesses to this register are RW.

21/03/2025 17:53; 154105dd5041532b480d9ef0c018b8420cbe5c19

Copyright © 2010-2025 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.